DN100 Field Display Insertion Type Thermal Air, Hot Gas Mass Flow Meter

Basic Info.

Model NO.	KTGMFM-100
Application	Industrial Production
Type	Probe Type Flow Meter
Measuring Media	Gas
Measuring Principle	Thermodynamic
Measurement Object	Closed Pipeline
Certification	CE, ISO
Connection Type	Flange, Plug-in, Thread, Tri-Clamp
Body Material	304ss, 316L
Power Supply Type	24VDC or 220VAC
Output Type	Pluse, 4-20mA, RS485and GPRS, Hart
Transport Package	Wooden Box Package or Carton Packing
Specification	680*280*270mm
Trademark	kunkeandao
Origin	Weihai
HS Code	9026100000
Production Capacity	3000 Pieces/Year

Product Description

DN100 Field Display Insertion type Thermal Air ,Hot Gas Mass Flow meter

Product Features :1.Real mass flow meter, no need for temperature and pressure compensation for gas flow measurement, convenient and accurate measurement. 2.Wide range ratio:1:1000,flow rate as high as 120Nm/s and as low as 0.1Nm/s.3.Easy to install and maintain. Non-stop production installation and maintenance can be achieved where field conditions permit. (requires special customization)
4.Insensitive to small particles such as dust, suitable for all kinds of single or mixed gas measurement.

Technical Parameter:

Fluid	gas without water molecules (except acetylene)
Velocity range	0~60m/s
Accuracy	Reading±1%,full range±0.5%
Repeatability	full range0.2%
Temperature	Environmental conditions:-20ºC~70ºC;Medium temperature:-20ºC~120ºC or -20ºC~350ºC
Power	24VDC/220VAC
Output	4~20mA,pulse
Response time	≤1s
temperature coefficient	0.05%/ºC
Communication interface	serial port output RS485,HART
Screen content	quantity of heat,flow for short period;total flow
Pressure	≤4.2MPa
connection	locking device/ball valve, flanged joint,Flange mounting
Explosion proof grade	Exd II CT4
Ingress protection	Sensor IP67;transmitter IP65
Alarm point	Relay dry contact output, can choose the upper limit single alarm or lower limit double alarm
Sensor diameter	3mm/4mm/5mm
Probe diameter	18mm
Sensor texture	1Cr18Ni9Ti;304L;hastelloy C;Ta
Probe texture	1Cr18Ni9Ti;304L;hastelloy C;Ta
Shell texture	Dangerous areas to install shell for powder coated aluminum castings
Electrical interface	M20X1.5
Pressure loss	Pipe diameter greater than DN80 can be ignored

Connaction type:

Field application

Company information WEIHAI KUNKE FLOW INSTRUMENT CO.,LTD. is a high-tech enterprise specializing in meter research and development, production, sales and service.
The company was founded in 2010. In 2012, it won the excellent incubation enterprise of Weihai City. It is a high-tech enterprise supported by the Weihai Municipal Government. In 2017, the company was listed as a securities company. The company has successively obtained ISO9001-2015 international quality system certification, ISO14001-2015 environmental management system certification, OHSAS18001-2007 occupational health and safety management system certification and ISO10012-2003 measurement management system certification, CE certificate,
Exhibition informationPayment&Delivery FAQ:
Q: How long will you give me the reply? A: we will contact you in 1 hours as soon as we can. Q:Could I visit your factory?
A: Sincerely invite you to visit our factory. Q: Do you provide samples ? A: Yes,we have materials in stock to help you to get the samples as soon as we can. Q: How about the quality of the managements ?
A: We have a complete quality control system , all of our products will be fully pre-inspection by QC departments before shipping to you . We have the certification of ISO,CE we could send the certification test of our company to youQ: What is your terms of payment ?
A: We could accept T/T, Paypal, WU ,Credit AssuranceQ: What is the warranty for your product ?
A: Warranty:1 years, Lifetime maintenanceQ: Can you make the products according to my own drawings?
A:Yes, we can do OEM service based on your requirement if it is executable.The field shows that the insertion type air measurement hot gas mass flowmeter has high precision and good seismic performance